58 void noteOn( StkFloat frequency, StkFloat amplitude );
61 void noteOff( StkFloat amplitude );
67 StkFloat
tick(
unsigned int channel = 0 );
79 void setBlowPressure( StkFloat val );
80 void setVibratoGain( StkFloat val );
81 void setVibratoFrequency( StkFloat val );
82 void setNoiseGain( StkFloat val );
83 void setBreathCutoff( StkFloat val );
84 void setSoftness( StkFloat val );
90 Iir radiation_filter_;
92 Iir visco_out_filter_;
103 StkFloat vibratoGain_;
105 StkFloat breathCutoff_;
106 StkFloat outputGain_;
140 unsigned int nChannels = lastFrame_.
channels();
141 #if defined(_STK_DEBUG_)
142 if ( channel > frames.
channels() - nChannels ) {
143 oStream_ <<
"Recorder::tick(): channel and StkFrames arguments are incompatible!";
148 StkFloat *samples = &frames[channel];
149 unsigned int j, hop = frames.
channels() - nChannels;
150 if ( nChannels == 1 ) {
151 for (
unsigned int i=0; i<frames.
frames(); i++, samples += hop )
155 for (
unsigned int i=0; i<frames.
frames(); i++, samples += hop ) {
157 for ( j=1; j<nChannels; j++ )
158 *samples++ = lastFrame_[j];
STK general infinite impulse response filter class.
Definition: Iir.h:34
void stopBlowing(StkFloat rate)
Decrease breath velocity with given rate of decrease.
static void handleError(const char *message, StkError::Type type)
Static function for error reporting and handling using c-strings.
void noteOff(StkFloat amplitude)
Stop a note with the given amplitude (speed of decay).
void clear(void)
Reset and clear all internal state.
STK sinusoid oscillator class.
Definition: SineWave.h:25
unsigned int channels(void) const
Return the number of channels represented by the data.
Definition: Stk.h:416
Recorder(void)
Class constructor.
unsigned int frames(void) const
Return the number of sample frames represented by the data.
Definition: Stk.h:419
void setFrequency(StkFloat val)
Set instrument parameters for a particular frequency.
~Recorder(void)
Class destructor.
STK linear interpolating delay line class.
Definition: DelayL.h:27
void noteOn(StkFloat frequency, StkFloat amplitude)
Start a note with the given frequency and amplitude.
void controlChange(int number, StkFloat value)
Perform the control change specified by number and value (0.0 - 128.0).
void startBlowing(StkFloat amplitude, StkFloat rate)
Apply breath velocity to instrument with given amplitude and rate of increase.
STK ADSR envelope class.
Definition: ADSR.h:24
StkFloat tick(unsigned int channel=0)
Compute and return one output sample.
An STK class to handle vectorized audio data.
Definition: Stk.h:278
A recorder / flute physical model.
Definition: Recorder.h:36
STK instrument abstract base class.
Definition: Instrmnt.h:19
STK noise generator.
Definition: Noise.h:21